      |
|
|
|
|||||
|
||||||
|
|
||||||
|
|
||||||
Spur Pad Box hooks are used for handling boxes and crates of all descriptions. The hooks are listed in capacities suitable for the largest crates made.
These hooks have large pressure pad to distribute the clamping load over a large area. The heat treated turned steel spurs are easily replaced when damaged or worn. A roller is provided in the shank of the hook for the sling to operate over.
 |
 |
| ITEM NUMBER |
CAPACITY TWO HOOKS |
DIMENSIONS | NUMBER OF SPURS |
GRADE 100 CHAIN SIZE |
WEIGHT | |
| REACH | WIDTH | |||||
| 343 | 2,000 LBS | 5 3/8" | 5" | 5 EACH | 9/32" | 11 LBS |
| 344 | 4,000 | 6 | 5 1/2 | 5 | 9/32 | 14 |
| 345 | 6,000 | 7 | 6 1/2 | 8 | 3/8 | 28 |
| 346 | 10,000 | 9 | 6 1/2 | 9 | 3/8 | 31 |
| 347 | 15,000 | 9 | 7 | 12 | 1/2 | 41 |
| 348 | 20000 | 10 1/2 | 8 | 12 | 1/2 | 72 |
| 341 | REPLACEMENT SPURS FOR PADS | 0.2 | ||||
The previous chain slings must meet or exceed all existing OSHA, ANSI, NACM and ASTM specifications requirements. All Grade 100 chain slings listed above are rated at a horizontal angle of 45°. If Grade 80 is used, check with sling manufacturer for appropriate horizontal angle.
Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.