      |
|
|
|||||
|
||||||
|
|
||||||
|
|
||||||
May be suspended form an overhead hoist to tilt, turn and hold drums in position for emptying. The totally enclosed worm and miter gear unit will turn the heaviest drums with a minimum of effort. Head of drum may be rotated from the vertical position through 135° degrees which is sufficient for most dumping and draining operations.
Hooks are easily and quickly attached to the drum which may be in either vertical or horizontal position.
Item # 205-1 and # 205-3 are furnished with a handwheel for use when the tilting operation is within reach of the operator.
Item # 205-2 and # 205-4 are provided with a chain pocket wheel, chain guide and 12 feet of hand chain for remote control of the dumping operation.
 |
 |
| Downs Item # 205-1 | Downs Item # 205-4 |
| Item Number |
Capacity | Drum Lengths. | Operation | Hook Type | Weight | |
| Min. | Max | |||||
| 205-1 | 1,000 LBS | 24 | 38 | Handwheel | Counter Hook | 176 |
| 205-2 | 1,000 | 24 | 38 | Hand Chain | Counter Hook | 176 |
| 205-3 | 1,000 | 24 | 38 | Handwheel | Barrel Hook | 185 |
| 205-4 | 2,000 | 24 | 38 | Hand Chain | Barrel Hook | 200 |
The counter hook is the hook shown on the 205-1. It clamps securely on the chime of barrel and allows for a vertical lift of the drum. The barrel hook arrangement will not allow for a vertical lift of the drum because the chain is not forced over the center of the drum.
Improper use of lifting equipment may cause serious injury or death.
Only a Qualified Operator, as defined by the ASME B30.20 Standards, shall operate equipment.
Read and understand General Warnings before operating equipment.